---

The Final product as of December 30, 2020

       This project was created for folks who want to experiment with mechanical or electronic NBTV but lack a signal source. I am lucky enough to own the very rare and expensive Aurora Designs WC-1 World Converter, a televsision standards converter that reproduces a couple dozen obsolete video signal standards from a standard definition NTSC, PAL or SECAM video input. There was a strong need for an easy to reproduce signal source and I believe that this is it.

       Should you decide to construct this project, you will want to download this [ZIP FILE]. It contains all the schematics, software and ready to use binary files needed to complete your own copy of the 10-4 Eleanor. You will need to have installed in your computer the following application programs: [Quick Basic 64], [Kicad], [Arduino IDE] and the App that is included with your particular device programmer. If you have no device programmer and want to get the same one I use, do an internet search for the "TL866 II". I purchased my programmer from a vendor on Ebay.

       If you have any questions about the project, fell free to write to me [HERE] and I will do my best to answer them and guide you to success.

       Thank you for visiting Labguy's World and reaing this article to the end. If you found the content useful, educational or entertaining, don't hesitate to recommend it to all your friends and enemies.

        Created: December 10, 2020, Last updated: December 30, 2020